IS210WSVOH1AE（IS200WSVOH1ACD) Advantages
GE IS210WSVOH1AE（IS200WSVOH1ACD) Turbine Control Card provides ultra-stable, high-safety closed-loop servo regulation solutions for GE Mark VI turbine control systems. The triple redundant channel backup design supports automatic seamless switching when single servo channel fails; signal distortion or circuit fault of one loop will not affect the overall flow and load control accuracy of the turbine unit, fully complying with strict SIL safety operation standards of large power generation equipment. Equipped with industrial high-speed servo arithmetic chips, the card achieves ultra-fast signal response and ultra-low signal attenuation, which can capture tiny position changes of hydraulic servo valves instantly and output matching drive signals, effectively stabilizing main steam pressure, exhaust temperature and power output of the unit during grid load fluctuation. All servo signal input and drive output channels adopt full differential electrical isolation design to isolate interference coupling between control rack and on-site high-power hydraulic equipment, significantly improving the overall anti-interference performance of Mark VI safety control station. Multi-layer surge, over-temperature and overload protection circuits are integrated on the card; once power supply drift, circuit overload or internal chip overheating occurs, the system will independently lock the faulty servo channel without interfering with the normal operation of other control loops, avoiding permanent burnout of IS210WSVOH1AE and IS200WSVOH1ACD turbine control card and other matched rack hardware. Comprehensive full-card real-time self-diagnosis function can quickly locate hidden faults including servo channel disconnection, arithmetic chip abnormality, backplane bus communication interruption and input power fluctuation, greatly shortening the troubleshooting cycle of turbine servo regulation system faults. This turbine control card has excellent adaptability to harsh industrial environments. High-temperature impact resistant PCB base material and durable industrial electronic components maintain long-term full-load continuous operation in dusty, high-temperature and vibration-prone turbine control cabinets, slowing the aging rate of core internal components and extending the overall service life of the circuit card. The full-coverage thick metal shielding layer suppresses strong external electromagnetic radiation generated by high-voltage power distribution cabinets, frequency converters and large rotating machinery, ensuring distortion-free high-precision servo signal transmission and stable continuous regulation operation of the entire Mark VI control rack. The exclusive Mark VI backplane bus interface is fully compatible with all Mark VI series universal controller modules, power distribution modules, servo I/O terminal boards and turbine protection boards, requiring no additional signal conversion adapters during system expansion or reconstruction. Independent servo running, feedback signal and fault status indicator lamps are arranged on the front panel, supporting online servo control loop inspection without full turbine unit shutdown, simplifying servo logic debugging and spare control card replacement workflows. Its compact plug-in structure maximizes the utilization of limited internal cabinet installation space. All IS210WSVOH1AE and IS200WSVOH1ACD turbine control cards are manufactured in strict accordance with GE Mark VI turbine industrial production standards and comply with IEC61508 power equipment safety specifications. Every circuit card undergoes long-term temperature cycle testing, vibration durability testing, full servo channel calibration and continuous load aging testing before factory delivery. Multi-stage cascaded electrical safety protection covers all signal sampling circuits, closed-loop operation circuits and backplane bus communication circuits, fully satisfying stringent continuous power generation safety control requirements of gas and steam turbine power plants.
IS210WSVOH1AE（IS200WSVOH1ACD) Applications
GE IS210WSVOH1AE（IS200WSVOH1ACD) Turbine Control Card is the core servo closed-loop control hardware installed inside Mark VI turbine control racks, widely applied to gas turbine combined cycle power stations, steam turbine thermal power plants, heavy-duty industrial generator set control rooms, waste heat recovery power generation projects and all energy facilities equipped with GE Mark VI turbine control systems. For all large-scale turbine control projects requiring fuel servo valve closed-loop adjustment, steam actuator precise flow control and stable unit load operation, this turbine control card cooperates with power distribution modules and servo I/O terminal boards to build a complete high-precision hydraulic servo regulation system for turbine units, undertaking all high-speed signal operation and analog drive output work of the control rack. It is also suitable for new energy gas power generation, metallurgical waste heat power generation and distributed power station automation projects built on the GE Mark VI platform, acting as the core operation carrier of the entire turbine servo control system.
IS210WSVOH1AE（IS200WSVOH1ACD) Certifications & Compliance
GE IS210WSVOH1AE（IS200WSVOH1ACD) Turbine Control Card complies with global power industry control safety and quality standards. It has passed EMC electromagnetic compatibility testing, long-cycle continuous operation reliability aging certification and TÜV SIL power unit safety assessment, fully conforming to RoHS environmental protection regulations, IEC61508 power equipment safety standards and GE Mark VI proprietary turbine control technical specifications. All IS210WSVOH1AE and IS200WSVOH1ACD turbine control cards are brand-new genuine original factory products; every circuit card undergoes rigorous full servo channel function testing, load calibration, circuit continuity inspection, surge resistance testing and long-term stability verification before shipment. All finished products adopt industrial anti-static, shockproof and dustproof customized packaging materials and carry a one-year global after-sales warranty service. The product meets IEC industrial control safety standards and GE internal Mark VI turbine equipment certification standards, capable of long-term stable operation under various harsh electromagnetic environments within power plant control rooms.
