Products information
The HIMA F3313 is a safety-related multi-channel output module engineered for industrial safety-
critical systems—such as emergency shutdown (ESD), valve control, actuator driving, and indicator
lamp activation—in sectors like oil & gas, chemical processing, and power generation. Compliant with
CE certification and aligned with HIMA’s safety heritage (likely IEC 61508 SIL 2/3 compatibility), it is
designed to reliably drive resistive, inductive, and lamp loads while integrating safe isolation between
channels, power domains, and the system I/O bus. This isolation prevents fault propagation (e.g.,
short-circuit in one channel affecting others) and mitigates electromagnetic interference (EMI),
ensuring operational stability in harsh industrial environments.
As a member of HIMA’s 3000-series output family (consistent with F3330’s 8-fold output
architecture), the F3313 likely features 4–8 independent output channels (optimized for medium-scale
load control) and core safety functions: real-time load monitoring (open-circuit/short-circuit
detection), overcurrent protection (via fuses or electronic limiting), and automatic fault response (e.g.,
output shutdown or relay de-energization). It supports inductive loads (e.g., solenoid valves, small
motors) with optional surge suppression (e.g., freewheeling diodes) and lamp loads (up to 10 W with
auxiliary resistors), eliminating the need for external protection components in most use cases.
For usability, the F3313 follows HIMA’s compact rack-mount design (typically 4 TE/SU, matching
F3330’s footprint) for seamless integration into standard industrial cabinets. It uses standardized Z-
series front cable plugs (e.g., Z7138) and screened cables for EMI mitigation, while front-panel LEDs
per channel provide at-a-glance status (e.g., “output active,” “fuse fault,” “load open”).
Additionally, it integrates diagnostic signals compatible with HIMA central modules (e.g.,
F8650/F8651) via the I/O bus, enabling centralized fault logging and system-level safety actions (e.g.,
triggering a process shutdown if a critical load fails).
Key Specifications
Parameter Category | Parameter | Estimated/Common Specifications (Consistent with HIMA 3000-Series Output Logic) |
Basic Information | Product Type | Safety-related multi-channel output module (estimated 4–8 channels) for resistive/inductive/lamp loads |
| Certification | CE compliant; IEC 61508 (SIL 2/3 compatible, typical for HIMA safety modules); EN 60947-5-1 (industrial output circuit standards) |
| Safety Isolation | - Channel-to-channel: ≥2.5 kV AC (1 minute, for fault isolation)- Channel-to-ground: ≥2 kV AC (1 minute, for personnel/equipment safety)- Output-to-I/O bus: ≥1.5 kV AC (1 minute, to protect system logic) |
Electrical Specifications | Load Compatibility | - Resistive load: Up to 500 mA (12 W) per channel (matching F3330’s 12 W rating)- Inductive load: Up to 300 mA (7.2 W) per channel (with 1N4007/1N4448 freewheeling diodes)- Lamp load: Up to 4 W (direct); 4–10 W (with 4.7 Ω/1 W auxiliary resistor, HIMA part-no. 010685479) |
| Load Protection | - Overcurrent: Miniature slow-blow fuses (4 A per channel, HIMA-compatible part-no.) or electronic current limiting- Short-circuit: Short-circuit proof (operating point: 0.75–1.5 A, triggers shutdown) |
| Power Supply Requirements | - Logic power: 5 V DC (40–60 mA, for module control and diagnostics)- Load power: 24 V DC (100–150 mA total, derived from HIMA system power supplies like F7133) |
| Output Performance | - Switching time: ~100 ms (relay-based, typical for safety-critical outputs)- Residual voltage (off state): ≤1.5 V (prevents false load activation)- Residual current (off state): ≤350 µA (minimizes leakage) |
| Fault Detection | - Open-circuit: Detected via current <50 mA (for 24 V loads)- Short-circuit: Detected via current >1.5 A (triggers overcurrent protection)- Fuse fault: Relay de-energization + LED alert (if fuse trips) |
Mechanical Specifications | Number of Channels | 4–8 independent output channels (medium-scale load control) |
| Space Requirement | 4 TE (Terminal Equipment units) or 4 SU (consistent with F3330’s compact design) |
| Cabling & Connectors | - Cable type: LiYY 8×0.5 mm² / 16×0.5 mm² (screened, for EMI mitigation)- Front cable plug: HIMA Z-series (e.g., Z7138/3313/C.., lead-marked for channel/load wiring)- Flat pin plug: 2.8×0.8 mm² (for L+/L– power connections) |
Functional Features | Status Indication | Front-panel LEDs per channel: Green (output active), Red (fault: short-circuit/fuse trip), Amber (load open) |
| Diagnostic Integration | 4–8 test bits for HIMA central modules (F8650/F8651) to log faults and trigger system safety responses |
| Environmental Resistance | Operating temperature: -20°C to +60°C; Relative humidity: 10–90% (non-condensing); Vibration: 0.5 g (10–60 Hz, IEC 61000-4-6) |
What can we offer you
1.100% brand new original packaging
2. Large inventory, usually shipped within 1-3 days
3. Competitive prices and real-time quotes
4. Professional services and technical support
5. The warranty period is one year.
6. Strictly test the machine before leaving the factory.
7. Use DHL, UPS FedEx, TNT for transportation
Inquiry me
Sales manager: Cheryl Qi
Email: chen@htechplc.com
Mobile/whatsapp: +8618150137565
Wechat: +8618150137565
