1756-CNBR Advantages
The Allen‑Bradley 1756-CNBR ControlNet Redundant Bridge Module stands out from comparable bridge modules in several key areas. Dual‑channel redundant ControlNet bridge design. The Allen‑Bradley 1756-CNBR ControlNet Redundant Bridge Module supports redundant A/B ControlNet media, automatic channel switching when one network cable or channel fails, and the Allen‑Bradley 1756-CNBR ControlNet Redundant Bridge Module avoids single‑point network failure for critical segmented ControlNet networks. High‑speed deterministic ControlNet bridging performance. The Allen‑Bradley 1756-CNBR ControlNet Redundant Bridge Module runs at fixed 5 Mbps ControlNet speed, supports scheduled I/O data and unscheduled message routing between network segments, the Allen‑Bradley 1756-CNBR ControlNet Redundant Bridge Module ensures deterministic communication for distributed remote I/O. Native ControlLogix backplane integration. As a factory‑original bridge module of Allen‑Bradley 1756 series, the Allen‑Bradley 1756-CNBR ControlNet Redundant Bridge Module directly plugs into 1756 chassis, no extra conversion adapter required. Comprehensive diagnostic LED indication. The Allen‑Bradley 1756-CNBR ControlNet Redundant Bridge Module is equipped with LEDs for module status, network status, channel A and channel B status, technicians can quickly locate fault points of the Allen‑Bradley 1756-CNBR ControlNet Redundant Bridge Module without complex diagnostic tools. Convenient configuration via RSLogix 5000. Users can configure node address, routing tables and redundant parameters for the Allen‑Bradley 1756-CNBR ControlNet Redundant Bridge Module inside RSLogix 5000 software, supporting online edits and network monitoring.
1756-CNBR Applications
Segmented Critical Process Control Redundant Network. Redundant ControlNet bridge module within Allen‑Bradley 1756 ControlLogix PLC systems, the Allen‑Bradley 1756-CNBR ControlNet Redundant Bridge Module is widely used for petrochemical, power and water treatment process control that requires network segmentation and zero network interruption. Cross‑segment Remote Redundant I/O Scanning. The Allen‑Bradley 1756-CNBR ControlNet Redundant Bridge Module connects isolated ControlNet network segments, allowing the local ControlLogix chassis to scan distributed remote I/O racks across different network segments over redundant media. Inter‑segment Controller Data Messaging. The Allen‑Bradley 1756-CNBR ControlNet Redundant Bridge Module supports message communication between multiple ControlLogix controllers located on separate ControlNet network segments. Legacy ControlNet High‑availability System Maintenance. The Allen‑Bradley 1756-CNBR ControlNet Redundant Bridge Module is stocked as spare replacement part for existing segmented redundant ControlLogix ControlNet networks. Industrial Automation Turnkey Project Network Segmentation. The Allen‑Bradley 1756-CNBR ControlNet Redundant Bridge Module serves as standard redundant routing interface for high‑reliability segmented ControlLogix automation solutions.
1756-CNBR Certifications & Compliance
The Allen‑Bradley 1756-CNBR ControlNet Redundant Bridge Module holds the following international safety and compliance approvals: • UL listed — North‑American industrial control equipment safety approval. • CE certification — European industrial control equipment safety and EMC compliance. • C‑Tick marked — EMC compliance for Australian and New Zealand markets. • Class I Division 2 certified — Suitable for installation in specified hazardous classified locations.
All modules supplied are 100% new original Allen‑Bradley parts. Every Allen‑Bradley 1756-CNBR ControlNet Redundant Bridge Module unit is functionally tested before dispatch, packed in professional anti‑static packaging, and covered by a one‑year warranty from the date of delivery.
